We have been involved in Diesel Motorsports since 2004. Drag racing throughout the country in various racing organizations. This has allowed us to meet allot of people and make allot of friends along the way. While doing this we have developed several products some out of necessity when someone had an idea and needed something or just just trying to make our own truck go faster or look better. Please browse through our products and if you have any questions or need something made feel free to contact us at bnbtooling.com or 269-496-9021 We accept Pay Pal
Bullseye / Borg Warner Turbos
We carry a complete line of turbos from stock replacement to the biggest and baddest special application stuff available . Please call for information and pricing
Our Products
03-07 Commonrail Manifold
This is our 03-12 Common rail side entrance intake. It allows you to machine the stock cast intake off of the head to allow for porting the intake side of the head. The side entrance allows a more even air flow and much less restriction the the stock intake. It also has the same bolt pattern as the stock grid heater for those living in the colder climates that like to use there truck year round but still want that extra performance. The manifold comes with all the mounting hardware and machining instructions for your machine shop or we can do it for you. The finish in these pictures show a brushed finish but the manifolds will come with a much shinier machine finish much like the pictures of the 12 valve and 24 valve manifolds .
Cost 3" entrance $1200.00 3.5 " entrance $1400.00
Cost 3" entrance $1200.00 3.5 " entrance $1400.00
12 Valve Manifold
Our 12 valve manifold is a top entrance with the front opening in the stock position. It uses the same bolt pattern as the stock air horn and grid heater and there is a second entrance for those that want more air yet. It comes with a cover plate if you want to use just a single entrance. It comes with all the mounting hardware and instructions. Cost $1200.00
P Pump 24 valve manifold
Our P Pump 24 valve manifold is also a top entrance manifold and comes with the entrance in the stock location and uses the same bolt pattern as the stock air horn and grid heater. I also has a second entrance for those that need that extra air. It comes with all the mounting hardware and machining instructions and cover for the second entrance if you need it.
We have dynoed this manifold on a motor with a single 3" charger at 1189 hp
Cost $1200.00
We have dynoed this manifold on a motor with a single 3" charger at 1189 hp
Cost $1200.00
24 Valve / common rail manifold top entrance
Sorry I don't have any pictures to put up right now but it looks allot like the P Pump 24 valve manifold except it has the front pad machined for the APPS mount.
The common rail top entrance is about the same as the 24 valve with the APPS mount machined in and the mounting holes drilled for the rail and injection lines . They come with mounting hardware and machining instructions for the head.
Cost $1200.00
The common rail top entrance is about the same as the 24 valve with the APPS mount machined in and the mounting holes drilled for the rail and injection lines . They come with mounting hardware and machining instructions for the head.
Cost $1200.00
Fuel Tank Sump
The B & B fuel sump can be mounted anywhere in the tank that has a flat smooth surface without dropping the tank. So you can put it at the back end of the tank where all of the fuel will be under acceleration. It is designed with a lip on the clamping plate to allow the fuel in but to restrict it from flowing out when accelerating or braking . It holds about 18 oz of fuel so your pumps wont lose their prime when you hit the brakes to slow down at the end of a run. It has 2 outlets tapped for 1/2 npt that can be used as a single or dual feed setup. It comes with stainless steel bolts and 1 1/2 npt push on fitting for 1/2" ID hose and a 1/2 npt plug and instructions for mounting.
Cost $200.00
Cost $200.00
Fuel Manifold Block
The B & B Fuel Manifold Block has 6 3/8 npt tapped holes in it and the mounting holes are the same as the mounting holes as the cummins fuel filter mount for easy mounting or can be mounted in any location. It can be used either as a manifold for fuel incoming fuel or for fuel return to the tank. It can be mounted with the holes in the upright position as pictured or the block can be turned with the holes facing out horizontally. Cost 120.00
To Order 269-496-9021 or bnbtooling.com
we accept Pay Pal
we accept Pay Pal